Detailed introduction of heat conduction oil boilers
The heat transfer oil boiler is not unfamiliar in printing, dyeing, hot stamping, drying and other industries. Because of its unique temperature setting and special medium material, which is recognized by many production enterprises and production factories, what should be paid attention to in the use of heat conduction oil boilers? What parameters do we need to know about the heat transfer oil boiler? Let's talk about the following.
1. What does KW mean on the nameplate of the heat conduction oil boiler?
First of all, boilers have their own size units, usually using tonnage and steam ton. But the thermal oil boiler is KW, from the professional interpretation of the industry, KW refers to the power unit of the boiler, we daily said 1 steam tons, about 600 thousand calories, that is, the power of 700kW. So 1 steamed tons of =60 million =700kw
Two. Pay attention to the oil filling of the heat conduction oil boiler.
In the use of heat transfer oil boiler, oil replenishing is an important and complicated work. Different from other liquid-phase boilers, heat-conducting oil boilers have the characteristics of high medium temperature and low pressure, so it is very important to pay attention to the oil supply work. At room temperature, the temperature of the cold oil is about 30 degrees Celsius, the oil in the boiler can reach about four or five Baidu, and the pressure in the boiler is not the same. Even the normal pressure boiler can not easily fill the oil. It is also necessary to adjust the oil with the high temperature oil filling pump. Because the temperature difference is too large, it may lead to the coking phenomenon of heat conduction oil due to uneven heating. The key to coking is to solve the degradation rate of heat conduction oil and the frequency of fuel oil.
Three. Other important instructions in the use of heat transfer oil boiler.
In the process of oil replenishment, the water content of low temperature oil will be too high, which will lead to oil pressure fluctuation when the oil difference temperature is too large. If the hot oil does not circulate in the boiler after the refueling pump stops supplying oil, it is easy to occur that the oil temperature is too high and the boiler life is shortened. Therefore, in the process of Replenishing Oil, circulating pumps also need to be operated. If the oil fired boiler is too high, the carbonization and coking will occur.